Large Bench Vice


An unpainted bench vice, supplied in an easy to assemble kit.

SKU: N/A Categories: , Tag:


This large bench vice is a must have for any railway workshop. The vice can be opened or closed as you please, or glued into a fixed position. The vice handle bar can also be installed loose into the front pin to provide a very convincing model.

The kit contains:

  • 1 x 3D printed base
  • 1 x 3D printed moving jaw
  • 1 x 3D printed pin
  • 1 x 3D printed main bar
  • 1 x 3D printed bar end
  • 1 x M2 screw

Approx dimensions (mm):

16mm 7/8ths
Height (without rivet bar) 19 24.5
Width (without rivet bar) 15 19.5
Length Closed 37 48
Length Fully Open 49 64

Assembly Instructions

  • Remove the main bar & pin from the print support (Flush cutters are advised). Put the bar through the pin and glue the end cap on using super glue, using the print support to hold it. Cut off the print support once set.
  • Fit the screw into the underside of the moving jaw. Making sure it’s fully pushed in to the slot.
  • Push the moving jaw into the vice base from the front. A small amount of filing may be needed if the fit is to tight.
  • Install the front pin & bar into the vice to complete the vice.

Additional information


16mm, 7/8ths


There are no reviews yet.

Be the first to review “Large Bench Vice”